Fujitsu S500M Getting Started Guide - Page 9
Connecting the Scanner - scansnap software
UPC - 097564307096
View all Fujitsu S500M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. Double-click the ScanSnap icon. CCliclikck 2.2.2. Connecting the USB cable Follow the procedures below to connect the USB cable. ATTENTION ● Use the USB cable supplied with this scanner. The operation with a commercially available USB cable is not guaranteed. ● When connecting to a USB hub, be sure to connect the scanner to the hub nearest to your computer (first stage). If you connect it to a USB hub from the second stage onwards, ScanSnap may not operate correctly. 1. Remove the seal from the USB connector. 2. Connect the scanner and your computer with the USB cable. Ö The "Welcome to the ScanSnap Manager Installer" window appears and the installation of ScanSnap Manager starts. 3. Follow the instructions to install the software. 4. After the installation is complete, eject the CD-ROM from the CD-ROM drive. ATTENTION Refer to the "ScanScnap Operator's Guide" (Manual.pdf) in ScanSnap Setup CD-ROM to learn more about ScanSnap Manager. 2.2. Connecting the Scanner 2.2.1. Connecting the AC cable ATTENTION Do not use cables other than the ones supplied with this product. Use only the specified AC cables and AC adapter. 1. Connect the AC cable to the AC adapter. USB cable 3. Open the Paper chute of the scanner. ATTENTION If the scanner does not turn on automatically, press the [POWER] button on the scanner. Ö Your computer will automatically detect the scanner. The installation of ScanSnap is complete! 2. Insert the connectors of the AC adapter to the scanner inlet, and then plug the cord in a power outlet. ATTENTION Inlet Outlet HINT The "ScanSnap Manager" icon with a triangle below the icon appears in the Dock menu. When the icon remains inactive , press the [POWER] button to turn off the scanner, and then press the [POWER] button again to restart the scanner. (Allow at least 5 seconds when you turn on/off the scanner.) When using the [POWER] button to turn off/on the scanner, press it for longer than one second. * To prevent miss-operation, the [POWER] button does not work unless it is pressed for longer than one second. ScanSnap S500M for Macintosh Getting Started | 7