Fujitsu XG1200 User Guide - Page 52

XG1200 User's Guide 5.1 About Command Reference This section describes how to read command references. 5.1.1 Command System The following is the system of commands provided in the XG1200: Item Function Management LAN Interface Configuration They are used to set items related to management LAN interface. commands Serial/telnet configuration commands They are used to set items related to serial and telnet connections. System Basic Operation commands They are necessary for system operation such as system time setting and password setting, and file operation. Configuration Information Operation They are used for operation related to configuration information commands (running-config and startup-config) of the XG1200. Switch Basic Configuration commands They are used to set the basic settings of the XG1200 switches in general. Link Aggregation Configuration commands They are used to create/delete aggregation groups. Switch Port Configuration commands They are used to set items related to operating characteristics of each switch port. Spanning Tree Protocol (STP) Setup They are used to set items related to STP (Spanning Tree Protocol). commands Virtual LAN (VLAN) Configuration commands They are used to set items related to virtual LAN (VLAN). Quality of Service (QoS) Setup commands They are used to set QoS (Quality of Service) configuration. Port Mirroring Setup commands They are used to set port mirroring. IGMP Snooping Setup commands They are used to set items related to IGMP Snooping. Statistics commands They are used to display various statistics. SNMP Configuration commands They are used to set items related to SNMP. RMON Configuration commands They are used to set items related to RMON. System Status Display commands They are used to display the system status of the XG1200 or operational status of the hardware. Maintenance commands They are necessary for maintenance. 52/258 All Rights Reserved, Copyright (C) PFU LIMITED 2005