Ganz Security LED-19 LED Series Maunal - Page 10

Monitor is turned off when it did not receive any signal from remote control or any button within the time that you set . (off/1Hour/2Hours/5Hours) (The screen warning is showed before automatic shutdown time that you set up) (Advanced Setting) 8. Memory Recall Reset the screen to the factory pre-set display settings.  Lock 1. Keypad Lock Turn keypad lock on or off 2. Remote Control Lock (optional) Turn Remote Control lock on or off Cam menu (HDMI)  Picture 1. Picture Mode Select the picture mode (Standard/Eco/Movie/Dynamic/User). 2. Brightness Adjust the brightness of the image. 3. Contrast Adjust the contrast of image, the difference between light and dark areas on the screen. 4. Color Mode Adjust Color of image. 5. Sharpness Adjust the display image quality (if the screen proceed to scaling up). 6. Tint(cam mode only) Adjust the Tint of image. 7. Color Tone Choose a different preset color temperatures or set your own customized color parameters. (Normal/Warm/Cool/User) 8. Advanced Setting 8-1 Noise Reduction Reduce the noise in the picture due to poor reception or poor picture quality (Off/ Low/ Middle/ High). 8-2 Back Light Adjust the back light to be brighter or darker. 8-3 DCR(Dynamic Contrast Ratio) Turn DCR on or off 8-4 DCC(Dynamic Contrast Control) Turn DCC on or off 8