Ganz Security ZN-B2MTP-2 ZN-BxMTP Manual - Page 35

System Reset Factory Default Reset

Get Ganz Security ZN-B2MTP-2 PDF manuals and user guides View all Ganz Security ZN-B2MTP-2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

3) When Firmware upgrade menu is displayed, browse to the desired firmware file on your computer. Click OK. NOTE: Do not disconnect power to the unit during the upgrade. The unit will restart automatically after the upgrade has completed. (1~5 minutes) System Reset (Factory Default Reset) There are two ways to reset the camera back to factory default. holding down about 10-20 sec the reset button on the Network cable Using the web browser: 1. Go to SETUP > System > Maintenance. 2. Click Factory Default Button and wait 1 minute for camera to reboot. Using the Reset Button: 1. Holding down 10-20 sec the reset button on the Network cable. 2. Release your finger on the reset button, waiting about 1 minute for camera reboot NOTE: The unit will now have the default IP address from a DHCP server. Use the '"MultiUpgradeTool.exe" to discover and connect to the camera. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
35
3) When Firmware upgrade menu is displayed, browse to the desired firmware
file on your computer. Click OK.
NOTE:
Do not disconnect power to the unit during the upgrade. The unit will restart
automatically after the upgrade has completed. (1~5 minutes)
System Reset (Factory Default Reset)
There are two ways to reset the camera back to factory default.
holding down about
10-20 sec the reset button on the Network cable
Using the web browser:
1. Go to SETUP > System > Maintenance.
2. Click Factory Default Button and wait 1 minute for camera to reboot.
Using the Reset Button:
1. Holding down 10-20 sec the reset button on the Network cable.
2. Release your finger on the reset button, waiting about 1 minute for camera reboot
NOTE:
The unit will now have the default IP address from a DHCP server.
Use the ‘“MultiUpgradeTool.exe” to discover and connect to the camera.