Ganz Security ZN-B2MTP-2 ZN-BxMTP Manual - Page 5

Network connector, Power Connector, I/O connector, Audio in, Audio out, Alarm in, Alarm out, 5A - ganz

Get Ganz Security ZN-B2MTP-2 PDF manuals and user guides View all Ganz Security ZN-B2MTP-2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

1. Network connector The GANZ PixelPro connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket could also be used to power the GANZ PixelPro via Power over Ethernet (PoE). The camera auto-senses the correct power level when using a PoE (Class 2) switch, router or injector. 2. Power Connector 24VAC power connector 3. I/O connector Audio in Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal) Audio out The Audio output (line level), which could be connected to a line output of a microphone system or an active speaker with a built-in amplifier. Alarm in One analog (dry contact) alarm input Alarm out One relay output (0.5A 125VAC / 1A 30VDC) Pin Assignment 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
5
1. Network connector
The GANZ PixelPro connects to the network via a standard network cable, and
automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). This socket could also be used to power the GANZ PixelPro via Power
over Ethernet (PoE). The camera auto-senses the correct power level when using a
PoE (Class 2) switch, router or injector.
2. Power Connector
24VAC power connector
3. I/O connector
Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo
signal)
Audio out
The Audio output (line level), which could be connected to a line output of a
microphone system or an active speaker with a built-in amplifier.
Alarm in
One analog (dry contact) alarm input
Alarm out
One relay output (
0.5A 125VAC / 1A 30VDC)
Pin Assignment