Ganz Security ZN-D1A ZN-DxxA Series Manual - Page 24
Configuration, Event
View all Ganz Security ZN-D1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
PixelPro User's Manual ZN-D2MAP/ZN-D1MAP/ZN-D1A 9. FTP Ver1.30 9.1 Configuration Server Configuration Enable / Disable the FTP function to download saved content from the SD Card remotely. When it is Enabled, the FTP client can download the saved content without removing the SD Card. Client Configuration Allows transmission of still images to remote sites, using the FTP server. Set the information for FTP transmission by inserting the IP address, Username and Password of the remote FTP Server. NOTE: This function cannot be used when Installation mode is turned ON. Set the first stream to 1280x720 or 1280x720(wide) in the Video > Codec section, and second stream to MJPEG or 'None'. 9.2 Event
PixelPro User’s Manual
ZN-D2MAP/ZN-D1MAP/ZN-D1A
Ver1.30
9.
FTP
9.1
Configuration
Server Configuration
Enable / Disable the FTP function to download saved content from the
SD Card
remotely.
When it is Enabled, the FTP client can download the saved content without removing the SD Card.
Client Configuration
Allows transmission of still images to remote sites, using the FTP server. Set the information for FTP
transmission by inserting the IP address, Username and Password of the remote FTP Server.
NOTE:
This function cannot be used when Installation mode is turned ON.
Set the first stream to
1280x720 or 1280x720(wide) in the Video > Codec section, and second stream to MJPEG or ‘None’.
9.2
Event