Ganz Security ZN-D1A ZN-DxxA Series Manual - Page 5

Power Connector, I/O terminal Block, 1 Audio in, Audio out, 3. Alarm in, 4. Alarm out

Get Ganz Security ZN-D1A PDF manuals and user guides View all Ganz Security ZN-D1A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

PixelPro User's Manual ZN-D2MAP/ZN-D1MAP/ZN-D1A Ver1.30 1. Network connector The GANZ PixelPro connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket could also be used to power the GANZ PixelPro via Power over Ethernet (PoE). The camera auto-senses the correct power level when using a PoE switch, router or injector. 2. Power Connector 12VDC or 24VAC power connector 3. I/O terminal Block 3.1 Audio in Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal) 3.2 Audio out The Audio output (line level), which could be connected to a line output of a microphone system or an active speaker with a built-in amplifier. 3.3. Alarm in One analog (dry contact) alarm input 3.4. Alarm out One relay output (2A : AC120V / DC60V)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
PixelPro User’s Manual
ZN-D2MAP/ZN-D1MAP/ZN-D1A
Ver1.30
1.
Network connector
The GANZ PixelPro connects to the network via a standard network cable, and automatically
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket
could also be used to power the GANZ PixelPro via Power over Ethernet (PoE). The camera
auto-senses the correct power level when using a PoE switch, router or injector.
2. Power Connector
12VDC or 24VAC power connector
3. I/O terminal Block
3.1 Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal)
3.2
Audio out
The Audio output (line level), which could be connected to a line output of a microphone system
or an active speaker with a built-in amplifier.
3.3. Alarm in
One analog (dry contact) alarm input
3.4. Alarm out
One relay output
(
2A : AC120V / DC60V
)