Garmin Edge 305HR Owner's Manual - Page 10

Position the Edge, To install the Edge on your, bike stem, For horizontal bars - edge 305 handlebar mount

Page 10 highlights

GETTING STARTED Position the Edge For best results, position the Edge with the face oriented toward the sky. This position allows the GPS antenna to acquire satellite information quickly. You can install the bike mount to the stem or handlebars. The stem installation (shown here) provides a more sturdy location. The optional wedge should be used under the mount for a better viewing angle. To install the Edge on your bike stem: 1. Place the wedge on the bike stem, and then place the bike mount on the wedge. Make sure the release lever is on the left. 10 release lever wedge (optional) bike mount For horizontal bars: Separate and remove the top part of the mount, turn it 90 degrees, and replace. Continue with step 2. For bars with a diameter less than 1 in (25.4 mm): Place the additional rubber pad under the bike mount to increase the diameter of the bar. The rubber pad also keeps the mount from slipping. Continue with step 2. Edge™ 205/305 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

10
Edge
205/305 Owner’s Manual
G
ETTING
S
TARTED
Position the Edge
For best results, position the
Edge with the face oriented
toward the sky. This position
allows the GPS antenna to
acquire satellite information
quickly.
You can install the bike mount
to the stem or handlebars. The
stem installation (shown here)
provides a more sturdy location.
The optional wedge should be
used under the mount for a better
viewing angle.
To install the Edge on your
bike stem:
1.
Place the wedge on the bike
stem, and then place the bike
mount on the wedge. Make
sure the release lever is on
the left.
wedge
(optional)
bike mount
release
lever
For horizontal bars:
Separate
and remove the top part of the
mount, turn it 90 degrees, and
replace. Continue with step 2.
For bars with a diameter less
than 1 in (25.4 mm):
Place the
additional rubber pad under
the bike mount to increase the
diameter of the bar. The rubber
pad also keeps the mount from
slipping. Continue with step 2.