Garmin GAD 43e Installation Manual - Page 23
Backshell Assemblies, 6.1 Backshell Assembly and D, Subminiature Connectors - adapter
View all Garmin GAD 43e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3.6 Backshell Assemblies 3.6.1 Backshell Assembly and D-Subminiature Connectors The GAD 43 connector kit (P/N 011-01990-00) includes one Garmin backshell assembly and one Garmin ground adapter assembly. Backshell connectors give the installer the ability to terminate shield grounds at the backshell housing using the shield block ground kit. Table 3-3 lists Garmin part numbers for the GAD 43 D-sub connector and the backshell assembly. Table 3-3. Backshell Assembly Figure 3-1 thru Figure 3-3 Ref Description 1 Cast Housing (P431) 2 Shield block 3 Screw, 4-40 x.250, FLHP100°, SS/P, Nylon 4 Slide Lock Spring 5 Slide Lock Lever 6 Screw,4-40x.375,PHP,SS/P, w/Nylon 7 Strain Relief 8 Cover (P431) 9 Screw, 4-40x.187,FLHP100,SS/P, w/Nylon 10 Connector, D-Sub, 50 Socket (P431) 11 Multiple Conductor Shielded Cable (See Interconnect Diagrams, APPENDIX C) 12 Shield Terminator 13 Wire, Insulated, 20 - 22 AWG (3" max length) 14 Socket Contacts, #20 (P431) 15 Ring terminal, #8, insulated, 18-22 AWG, 14-16 AWG 16 Screw, PHP, 8-32x.312", Stainless or Cad Plated Steel 17 Split Washer, #8, (.045" compressed thickness) Stainless or Cad-plated steel 18 Flat Washer, #8, .032" thick, .174"ID, .375" OD, Stainless or Cad Plated Steel 19 Silicon Fusion Tape Garmin P/N Notes 125-00085-00 117-00147-01 211-63234-08 N/A N/A 211-60234-10 115-00499-03 115-00500-04 211-63234-06 330-00502-50 As Required [2] [3] [3] [4] [4] [2], [5] [2] [2] [2] [5] [6] As Required As Required 336-00022-00 MS25036-149, MS25036-153, MS25036-156 MS51957-42, MS35206-242 MS35338-137, MS35338-42 NAS1149CN832R, NAS1149FN832P 249-00114-00 [6], [7] [6], [7] [6] [6] [6] [6] [6] [1] All items are applicable to the P431 connector unless otherwise specified. [2] Supplied as part of Backshell Kit P/N 011-00950-04 (P431). [3] Supplied as part of Ground Adapter Kit P/N 011-01169-01. [4] Supplied as part of Slide Lock Kit P/N 330-90006-04 (P431). [5] Supplied as part of GAD 43 Connector Kit P/N 011-01990-00. [6] Not supplied - must be purchased separately. [7] Solder sleeve with pre-installed lead may be used instead of items 12 and 13. GAD 43 Installation Manual 190-00899-00 Page 3-3 Rev. B