Garmin GPSMAP 64csx Owners Manual - Page 17

3 Select a file. 4 Press the Delete key on your keyboard. NOTE: If you are using an Apple® computer, you must empty the Trash folder to completely remove the files. Disconnecting the USB Cable If your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect the device. 1 Complete an action: • For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your device. • For Apple computers, select the device, and select File > Eject. 2 Disconnect the cable from your computer. Specifications Battery type Battery life Water rating Operating temperature range Charging temperature range Compass-safe distance Wireless frequency/ protocol NiMH battery pack or two AA batteries (1.5 V or lower alkaline, NiMH, or lithium) Up to 16 hr. IEC 60529 IPX71 From -20° to 45°C (from -4° to 113°F) From 0° to 40°C (from 32° to 104°F) 17.5 cm (7 in.) 2.4 GHz @ 0 dBm nominal Appendix Garmin Support Center Go to support.garmin.com for help and information, such as product manuals, frequently asked questions, videos, and customer support. Turning On the Backlight Select any key to turn on the backlight. The backlight turns on automatically when alerts and messages are displayed. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Select Setup > ANT Sensor. 3 Select your sensor. 4 Select Search for New. When the sensor is paired with your device, the sensor status changes from Searching to Connected. Tips for Pairing ANT+ Accessories with Your Garmin Device • Verify that the ANT+ accessory is compatible with your Garmin device. • Before you pair the ANT+ accessory with your Garmin device, move 10 m (33 ft.) away from other ANT+ accessories. • Bring the Garmin device within range 3 m (10 ft.) of the ANT+ accessory. • After you pair the first time, your Garmin device automatically recognizes the ANT+ accessory each time it is activated. This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the accessories are activated and functioning correctly. • When paired, your Garmin device receives data from only your accessory, and you can go near other accessories. Troubleshooting Restarting the Device If the device stops responding, you may need to restart it. This does not erase any of your data or settings. 1 Remove the batteries. 2 Reinstall the batteries. Viewing Device Information You can view the unit ID, software version, regulatory information, and license agreement. Select Setup > About. Restoring All Default Settings You can reset all settings back to the factory default settings. Select Setup > Reset > Reset All Settings > Yes. Optional Accessories Optional accessories, such as mounts, maps, fitness accessories, and replacement parts, are available at http://buy.garmin.com or from your Garmin dealer. tempe™ The tempe is an ANT+ wireless temperature sensor. You can attach the sensor to a secure strap or loop where it is exposed to ambient air, and therefore, provides a consistent source of accurate temperature data. You must pair the tempe with your device to display temperature data from the tempe. Pairing Your ANT+ Sensors Before you can pair, you must put on the heart rate monitor or install the sensor. The device is compatible with the heart rate monitor, GSC™ 10 speed and cadence sensor, and tempe wireless temperature sensor. You can customize a data field to display sensor data. 1 Bring the device within range (3 m) of the sensor. 1 The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating. Appendix 13