Garmin Vector 3/3S Owners Manual - Page 10

19Use a 4 mm hex key to gently tighten the battery cover. NOTE: Do not over-tighten the battery cover. The cover is sufficiently tight when the O-ring gasket is no longer visible. The pedal LED flashes red once. 20Install the pedals (Installing the Pedals, page 1). Vector Storage If you are transporting your bicycle or not using Vector for an extended period of time, Garmin recommends removing Vector and storing it in the product box. Forerunner® 935 and fēnix® 5 Series Instructions Pairing Vector with Your Forerunner 935 and fēnix 5 Series Other Compatible Devices Edge 1000 Instructions This procedure contains instructions for the Forerunner 935 and fēnix 5 Series watches. For more information about compatible watches, go to www.garmin.com/manuals/vector3. 1 Bring your compatible watch within range (3 m) of the sensor. Pairing Vector with the Edge 1000 1 Bring the Edge device within range (3 m) of the sensor. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Turn on the Edge device. 3 From the home screen, select > Sensors > Add Sensor > Power. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Hold or MENU. 3 Select Settings > Sensors & Accessories > Add New > Power. 4 Rotate the crank arm. 5 Select your sensor. 4 Rotate the crank arm a few times. 5 Select your sensor. When the sensor is paired with your Edge device, a message appears, and the sensor status is Connected. You can customize a data field to display Vector data. After the sensor is paired with your device, the sensor status changes from Searching to Connected. Sensor data appears in the data page loop or a custom data field. Entering the Crank Length with the Forerunner 935 and fēnix 5 Series Entering the Crank Length with the Edge 1000 The crank length is often printed on the crank arm. 1 Rotate the pedals a few times in order to activate Vector. 2 From the home screen, select > Sensors > > Sensor Details > Crank Length. The crank length is often printed on the crank arm. 1 Rotate the pedals a few times in order to activate Vector. 2 Hold or MENU. 3 Select Settings > Sensors & Accessories > Power. 4 Select your sensor. 3 Enter the crank length, and select . 5 Select Crank Length. Edge 520 and Edge 820 Instructions 6 Enter the crank length, and select . Pairing Vector with the Edge 520 and Edge 820 This procedure contains instructions for the Edge 520 and Edge 820. For more information about compatible devices, go to www.garmin.com/manuals/vector3. 1 Bring the Edge device within range (3 m) of the sensor. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Select or Menu. 3 Select Settings > Sensors > Add Sensor > Power. 4 Rotate the crank arm. 5 Select your sensor. 6 Select Add. When the sensor is paired with your device, is solid. You can customize a data field to display power data. Entering the Crank Length with the Edge 520 and Edge 820 The crank length is often printed on the crank arm. 1 Rotate the pedals a few times in order to activate Vector. 2 Select or Menu. 3 Select Settings > Sensors > Power. 4 Select your sensor. 5 Select Sensor Details > Crank Length. 6 Enter the crank length, and select . Appendix Registering Your Vector System Help us better support you by completing our online registration today. • Go to the Garmin Connect app. • Keep the original sales receipt, or a photocopy, in a safe place. Upgrading Your Vector 3S to a Dual Sensing System Before you install the new right pedal, the left pedal must be paired and connected to a compatible Edge device or the Garmin Connect app. 1 Review the Vector installation instructions (Installing the Vector Components, page 1). 2 Remove the existing right pedal. 3 Install the new right pedal (Installing the Pedals, page 1). 4 Rotate the crank arm. 5 Select an option to connect the right pedal to the left pedal: • From your compatible Edge device, select > Sensors, select your sensor, select Sensor Details > Pair Right Power Sensor, and enter the sensor ID found on the pedal. • From the Garmin Connect app device settings, enable the Right Pedal, and enter the sensor ID found on the pedal. 6 Other Compatible Devices