Gastroback 44005 User Manual - Page 9
Operation
View all Gastroback 44005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operation Before first use Before first use and after a long period of storage, clean the appliance with a damp soft cloth and warm soapy water (see ›Care and cleaning‹). WARNING: Always unplug the appliance and wait for the appliance to cool down, before cleaning. Do not pour or drip any liquids on the appliance or power cord. When liquids are spilled on the appliance, immediately unplug the appliance and dry it to avoid risk of electric shock or fire. Do not attempt to operate the appliance, when liquids are on or in the electrical section of the appliance. Do not clean the appliance in the dishwasher. 1. Remove all promotional materials and packing and place the appliance on a convenient surface (explained in ›Safeguards‹). 2.Wipe the heating surface with a damp soft cloth. Dry it properly after cleaning. Note: When using the Design Crêpemaker Pro for the first time, you may notice a fine smoke haze, because of the first heating of some of the components. There is no need for concern. To prevent smell and taste of your food from being affected, you should heat the appliance on the highest level without any batter. If the burnt smell occurs again on later use, clean the appliance (see: ›Care and cleaning‹). If the burnt smell persists stubbornly even after thoroughly cleaning the appliance, return the appliance to an authorised service centre for examination and repair. 3. Grease a paper towel lightly with oil. Whipe the heating plate with the paper towel to prepare the non-stick coating for use. The temperatures given in the recipes are for information purposes only. You can change them to suit your requirements. In between each crêpe, clean the batter spreader or the wooden batter spreader with the brush provided for this purpose and leave these accessories soak in the water tray. The minimum adjustment of the thermostat will not stop the appliance from heating. At this adjustment, the heating plate is regulated at around 155°C. The appliance stops heating completely only when disconnected from the power outlet. Note: The batter spreader may only be used between positions 1 and 6. Never leave it permanently on the hot plate (risk of damage). The wooden batter spreader must be used to spread the batter between positions 7 and 8. Using your Design Crêpemaker Pro 1. Prepare the batter. You will find recipes on page 33 and following. 2.Place the appliance on a well accessible, stable, level, dry, and suitable large table or counter. Do not place any cloth or tissue beneath or on the appliance, to avoid any risk of fire, electric shock and overheating. Always keep the table or counter clean and dry and immediately wipe off spilled liquids. Ensure that there is no foreign substance on the heating surface. Do not touch the exterior of the Design Crêpemaker Pro while the appliance is in use. Always keep your hands, face and arms as well as any clothing and other heat-sensitive objects away from the wafflemaker during operation and only touch the handle, attachment, or the control panel. Do not touch the heating surface (see: ›Important safeguards‹) 29