Gateway 9510 Gateway 9510 Server User Guide - Page 72
To install or replace memory, System Memory
![]() |
View all Gateway 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Installing memory To install or replace memory: 1 Follow the instructions in "Preventing static electricity discharge" on page 41. 2 Follow the instructions in "Opening the server case" on page 42. 3 Follow the instructions in "Removing the air ducts" on page 46. 4 Pull the plastic tabs away from the sides of the memory module slot. If you are replacing a memory module, remove the old module. 5 Align the notch on the new module with the notch in the memory module slot and press the module firmly into the slot. The tabs on the sides of the memory slot should secure the memory module automatically. 6 Follow the instructions in "Installing the air ducts" on page 47. 7 Follow the instructions in "Closing the server case" on page 52. 8 Restart your server and open the BIOS Setup utility. Verify the System Memory listed in the Main menu. When you exit the BIOS Setup utility, make sure that the operating system loads completely. 9 Follow the instructions in "Updating the FRU/SDR" on page 37. www.gateway.com 67
![](/manual_guide/products/gateway-computers-9510-gateway-9510-server-user-guide-90b0fb8/72.png)