Gateway E-4610D 6-bay mBTX Pro Hardware Reference Guide (for computers with Wi - Page 58
Replacing the processor
View all Gateway E-4610D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
CHAPTER 4: Upgrading Your Computer 5 Insert the new I/O panel board into the computer, then replace the screw. 6 Connect the I/O panel cable to the new I/O panel. 7 Replace the front bezel by following the instructions in "Removing and installing the front bezel" on page 38. 8 Replace the side panel by following the instructions in "Opening and closing the case" on page 37. Replacing the processor Tools Phillips screwdriver To replace the heat sink and processor: 1 Remove the side panel by following the instructions in "Opening and closing the case" on page 37. 2 Remove the fan by pulling it away from the system board. 52
CHAPTER 4: Upgrading Your Computer
52
5
Insert the new I/O panel board into the computer, then
replace the screw.
6
Connect the I/O panel cable to the new I/O panel.
7
Replace the front bezel by following the instructions in
“Removing and installing the front bezel” on page 38
.
8
Replace the side panel by following the instructions in
“Opening and closing the case” on page 37
.
Replacing the processor
To replace the heat sink and processor:
1
Remove the side panel by following the instructions in
“Opening and closing the case” on page 37
.
2
Remove the fan by pulling it away from the system
board.
Tools
Phillips screwdriver