Gateway E-4610D 6-bay mBTX Pro Hardware Reference Guide (for computers with Wi - Page 61
Replacing the system battery
View all Gateway E-4610D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
www.gateway.com Replacing the system battery Warning Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries following the manufacturer's instructions. Caution Any custom BIOS settings you have made will be lost when you remove the system battery. All settings will return to their factory defaults. If the computer clock does not keep time or the settings in the BIOS Setup utility are not saved when you turn off your computer, replace the system battery. Use a battery of the same size and voltage as the original battery that was in your computer. To replace the battery: 1 Restart your computer. 2 During the restart, press and hold F2. The main menu of the BIOS Setup utility opens. 3 Write down all values in the menus and submenus, then exit from the utility. Caution Any custom BIOS settings you have made will be lost when you remove the system battery. All settings will return to their factory defaults. 4 Shut down your computer. 5 Remove the side panel by following the instructions in "Opening and closing the case" on page 37. 6 Locate the old battery on the system board and note its orientation. You will need to install the new battery the same way. Battery release tab 55