Gateway E-4610D 6-bay mBTX Pro Hardware Reference Guide (for computers with Wi - Page 65
Connect the fan cable to the system board, then insert
View all Gateway E-4610D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
www.gateway.com 12 Release the processor from the old system board by pushing down on the lever and then lifting it completely up. 13 Remove the processor from the old system board. 14 Install the processor onto the new system board making sure that Pin 1 on the processor (indicated by the silk-screened arrow on the corner of the processor) aligns with Pin 1 on the processor socket (indicated by the absence of a pin hole in the processor socket), then return the lever to its locked position. 15 Place the heat sink on the system board, then tighten the screws that secure it to the system board. 16 Install the power supply into the case, then install the three screws to secure the power supply to the case. 17 Connect the power and data cables using the notes you took previously. 18 Connect the fan cable to the system board, then insert the fan into place. 19 Install the memory you removed previously. 20 Reinstall any expansion cards you removed, using the notes you took previously. 21 Replace the side panel, then return the computer to an upright position. 22 Reconnect all external cables and the power cord. 59