Gateway E-9220T Gateway E-9220T Server User Guide - Page 46
Installing or replacing a hard drive, To install a hard drive in an internal drive bay
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Installing drives Installing or replacing a hard drive Use these instructions to install or replace a hard drive. Important To install a hard drive in the bottom external 3.5-inch drive bay, follow the instructions in "To install a drive in an external drive bay:" on page 39. To install a hard drive in an internal drive bay: 1 Follow the instructions in "Preventing static electricity discharge" on page 29. 2 Follow the instructions in "Opening the server case" on page 30. 3 If you are replacing a drive, go to Step 4. - OR - If you are adding a new drive to an available drive bay, slide the green drive retainer lever toward the front of the drive bay, then go to Step 7. 4 Disconnect the old drive's cables from the front of the drive. 5 Slide the green drive retainer lever toward the front of the drive bay, then pull the drive out of the bay. Drive retainer lever 6 Set any jumpers on the new drive. See the drive's documentation for further instructions. www.gateway.com 41