Gateway E-9220T Gateway E-9220T Server User Guide - Page 63
Follow the instructions in, Insert the new fan into the chassis
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 4: Installing Components 4 Unscrew the four fan retention screws holding the fan to the back of the chassis. 5 Pull the fan from the chassis, noting the orientation. 6 Insert the new fan into the chassis, then replace the fan retention screws. Important Make sure that the new fan is oriented the same way (air flow) as the old fan. 7 Plug the fan cable into the fan connector on the system board. 8 Follow the instructions in "Closing the server case" on page 37. 58 www.gateway.com
58
www.gateway.com
Chapter 4: Installing Components
4
Unscrew the four fan retention screws holding the fan to the back of the chassis.
5
Pull the fan from the chassis, noting the orientation.
6
Insert the new fan into the chassis, then replace the fan retention screws.
7
Plug the fan cable into the fan connector on the system board.
8
Follow the instructions in
“Closing the server case” on page 37
.
Important
Make sure that the new fan is oriented the same way (air flow) as
the old fan.