Gateway E-9520T User Guide - Page 48
expansion card into the PCI slot., Position the new PCI expansion card over the PCI slot
![]() |
View all Gateway E-9520T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CHAPTER 4: Installing Components Caution Do not touch the contacts on the bottom part of the expansion card. Touching the contacts can cause electrostatic damage to the card. www.gateway.com 4 Press down on the top of the expansion card latch (3) for the PCI expansion card you are removing, then rotate the latch up (4) to release the card. Caution Make sure that you only plug a PCI-X expansion card into the PCI-X slot. Plugging a PCI-X expansion card into a PCI slot may damage the PCI-X card. 5 Gently remove the PCI card from the card slot, then lift the PCI card out of the chassis. 6 Position the new PCI expansion card over the PCI slot, then press the PCI expansion card into the PCI slot. 7 From the back of the server, push the expansion card latch in to the locked position. 8 If you opened the card guide initially, rotate the card guide tab down to the locked position. 9 Follow the instructions in "Closing the server case" on page 30. 10 See the card's documentation for software installation instructions. 42
![](/manual_guide/products/gateway-computers-e9520t-user-guide-7781b04/48.png)