Gateway E-9520T User Guide - Page 67

Recovering the BIOS

Get Gateway E-9520T PDF manuals and user guides View all Gateway E-9520T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

www.gateway.com Recovering the BIOS To update the BIOS under WinPE: 1 Print the appendix for "BIOS Settings" on page 107. 2 Restart your server, then press F2 when the Gateway logo screen appears during startup. 3 Record any custom BIOS settings on your printout. 4 Download the BIOS update files from support.gateway.com. 5 Copy the files (AFUWIN.EXE, UCORESYS.SYS, UCOREW64.SYS, the ROM image file, and FBBWIN.BAT) to the same directory. 6 Boot your server with the SCDVD (into the WinPE environment), go to the directory containing the files, and execute the FBBWIN.BAT utility from the command prompt. 7 Restart your server and load the default BIOS values. 8 Enter any custom BIOS settings you recorded in Step 3, then save your changes and close the BIOS Setup utility. Recovering the BIOS Important This method does not work if the keyboard is connected through the KVM switch. If you encounter a problem while you are updating the BIOS, such as a power outage, the BIOS update may not be successful. If the system continues to try to boot from the new, corrupted BIOS, you can manually recover the old BIOS so you can try another update. Also, if the ROM image is damaged the system automatically enters recovery mode and updates the system ROM, without the boot block. To recover the old BIOS: 1 Insert a diskette, CD or DVD, or a bootable USB "disk-on-key" containing the AMIBOOT.ROM file. 2 Turn on or restart the server. Press and hold CTRL+HOME during power up until the recovery process begins (the server beeps). The process is complete when you see a message on the screen. 3 Remove the diskette, the CD or DVD, or the bootable USB "disk-on-key." 4 Restart the server. The old BIOS is recovered. To manually recover the BIOS: 1 Follow the instructions in "Preventing static electricity discharge" on page 28. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 29. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Recovering the BIOS
www.gateway.com
61
To update the BIOS under WinPE:
1
Print the appendix for
“BIOS Settings” on page 107
.
2
Restart your server, then press
F2
when the Gateway logo screen appears
during startup.
3
Record any custom BIOS settings on your printout.
4
Download the BIOS update files from
support.gateway.com
.
5
Copy the files (
AFUWIN.EXE, UCORESYS.SYS, UCOREW64.SYS
,
the ROM image file, and
FBBWIN.BAT
) to the same directory.
6
Boot your server with the SCDVD (into the WinPE environment), go to the
directory containing the files, and execute the
FBBWIN.BAT
utility from
the command prompt.
7
Restart your server and load the default BIOS values.
8
Enter any custom BIOS settings you recorded in
Step 3
, then save your
changes and close the BIOS Setup utility.
Recovering the BIOS
If you encounter a problem while you are updating the BIOS, such as a power
outage, the BIOS update may not be successful. If the system continues to try
to boot from the new, corrupted BIOS, you can manually recover the old BIOS
so you can try another update. Also, if the ROM image is damaged the system
automatically enters recovery mode and updates the system ROM, without the
boot block.
Important
This method does not work if the
keyboard is connected through the KVM
switch.
To recover the old BIOS:
1
Insert a diskette, CD or DVD, or a bootable USB “disk-on-key” containing
the AMIBOOT.ROM file.
2
Turn on or restart the server. Press and hold
C
TRL
+H
OME
during power up
until the recovery process begins (the server beeps). The process is
complete when you see a message on the screen.
3
Remove the diskette, the CD or DVD, or the bootable USB “disk-on-key.”
4
Restart the server. The old BIOS is recovered.
To manually recover the BIOS:
1
Follow the instructions in
“Preventing static electricity discharge” on
page 28
. Make sure that you turn off the server, then unplug the power
cord(s) and all other cables connected to the server.
2
Follow the instructions in
“Opening the server case” on page 29
.