Gateway FX510 8512066 - Gateway Reference Guide (for FX510 computers with Wind - Page 57
Step 6, Step 3
View all Gateway FX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
www.gateway.com Important The color and shape of your replacement drive's front cover may vary from your original drive. 3 If you are installing a new drive, go to Step 6. - OR If you are replacing an existing drive, disconnect the cables from the drive, noting their locations and orientation. You will reconnect the cables after you install the new drive. 4 Remove the thumbscrew from the diskette drive. Thumbscrew 5 Slide the drive release latch back to unlock the drive, then slide the drive forward and out of the drive bay. 6 Slide the new drive into the drive bay. 7 Slide the drive release latch forward to lock the drive into place. You do not need to replace the thumbscrew because it was originally installed for shipping purposes. 8 Reconnect the drive cables using your notes from Step 3. If you are installing a new drive, follow the manufacturer's instructions. 51