Gateway M405 User Guide - Page 277

Troubleshooting Help and Support For more information about dialing properties in Windows XP, click Start, then click Help and Support. Type the keyword dialing in the Search box , then click the arrow. To check the dialing properties in Windows 2000: 1 Click Start, Settings, then click Control Panel. The Control Panel window opens. 2 Click/Double-click the Modems icon, then click Dialing Properties tab. The Dialing Properties dialog box opens. 3 Make sure that all settings are correct. ■ Disconnect any answering machine, fax machine, or printer that is on the same line as the modem. Do not connect these devices to the same telephone line as the modem. ■ Make sure that you are not using a digital, rollover, or PBX line. These lines do not work with your modem. ■ Check for line noise (scratchy, crackling, or popping sounds). Line noise is a common problem that can cause the modem to connect at a slower rate, abort downloads, or even disconnect. The faster the modem, the less line noise it can tolerate and still work correctly. Listen to the line using your telephone. Dial a single number (such as 1). When the dial tone stops, listen for line noise. Wiggle the modem cable to see if that makes a difference. Make sure that the connectors are free from corrosion and all screws in the wall or telephone wall jack are secure. You can also call your telephone service and have the telephone line checked for noise or low line levels. ■ Try another telephone line (either a different telephone number in your house or a telephone line at a different location). If you can connect on this line, call your telephone service. ■ Try connecting with the modem at a lower connection speed. If reducing the connect speed lets you connect, call your telephone service. The telephone line may be too noisy. www.gateway.com 267