Gateway NX200 Gateway Notebook Hardware Reference - Page 37
If you are removing a module, gently press outward on the clip at each
View all Gateway NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
www.gateway.com Adding or replacing memory 5 Turn your notebook over so the bottom is facing up, then remove the battery. For more information, see "Changing batteries" on page 27. 6 Remove the memory bay cover screw. Screw 7 Slide the memory bay cover, then remove it. 8 If you are removing a module, gently press outward on the clip at each end of the memory module until the module tilts upward. Clip Clip 33
Adding or replacing memory
www.gateway.com
33
5
Turn your notebook over so the bottom is facing up, then remove the
battery. For more information, see
“Changing batteries” on page 27
.
6
Remove the memory bay cover screw.
7
Slide the memory bay cover, then remove it.
8
If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.
Screw
Clip
Clip