Home » GE Manuals » Home Security » GE 80-649-3N-XT » Manual Viewer

GE 80-649-3N-XT User Manual - Page 12

Communicating with your system - manual

UPC - 782136719079

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

4 Simon XT User Manual Communicating with your system Sending commands or instructing your security system is done through a series of key presses on the panel, touchpads, or a remote telephone. Table 2. System communication devices Device Description Control panel You can enter commands for your security system through simple key presses on the panel. Depending on how your system is programmed, you may need to enter an access code for certain commands. An access code is a numeric code that allows authorization to operate your security system. Remote handheld touchpad This touchpad gives you the option to enter commands from any room in your house. You can enter commands through simple key presses on the touchpad. Keyfob Keyfobs are handy for simple arming, disarming and light control functions. They are portable and can be carried off-site in a purse or pocket. Telephone Touchtone telephones can be used to communicate with your system while you are off-site. Ask your installer if you have this feature. Note: The default master code is 1-2-3-4 when the security system is shipped from the factory. You should change your code after your system is installed. See Code options on page 26.

Section	Page
Preface	7
Conventions used in this document	7
Safety terms and symbols	7
Chapter 1 Introduction	9
Security system components	10
Figure 1. Simon XT system	10
Table 1. Simon XT system components	11
Communicating with your system	12
Table 2. System communication devices	12
Chapter 2 Using the control panel	13
Panel controls	14
Figure 2. Simon XT self-contained panel	14
Table 3. Simon XT panel keys and features	15
Standard text display	15
Simon XT features	17
Things you can do	17
Home security	17
Table 4. Simon XT arming levels	17
Exit/entry delay	19
Table 5. Entry and exit delay details	19
Bypassing sensors	20
Alarms	21
Light control (optional)	22
Chimes	22
Latchkey	23
System status	23
Using an offsite phone	24
Table 6. Phone controls	24
Using touchpads	25
Remote handheld touchpad	25
Figure 3. Remote handheld touchpad	25
Keyfob	26
Figure 4. Keyfob (keychain touchpad)	26
Chapter 3 How your system communicates	27
Status beeps	28
Table 7. Status beeps	28
Alarm sirens and lamp modules	29
Table 8. Alarm Siren and X10 Light Information	29
Panel indicator lights	30
Table 9. Panel indicator lights	30
Trouble beeps	31
Chapter 4 Programming	33
System menu	34
Entering and exiting the system menu	34
Code options	34
Table 10. Simon XT system codes	34
Menu navigation	35
Table 11. Simon XT menu structure	35
Top-level menus	36
Set clock	36
Light schedules	37
Sensor lights	37
Chime	37
Special chime	38
System tests	38
Revision	38
Contrast	38
System programming	39
Access codes	39
Security	40
Phone numbers	40
Timers	41
Siren options	41
Light control	43
Chapter 5 Testing	45
Testing sensors	46
Table 12. How to trip devices for sensor test	46
Testing communication	47
System download	48
Appendix A Reference information	49
Alarm system limitations	50
Emergency planning	50
Smoke and heat detector locations	51
Figure 5. Smoke detector locations	51
Your floorplan	52
Sensor and module locations	52
Table 13. Sensor locations	52
Table 14. X10 module locations	53
Access codes	54
Table 15. Access codes	54
Delays	54
Table 16. Delays	54
Table 17. Simon XT system quick reference	55

Match case Limit results 1 per page

Simon XT

User Manual

Communicating with your system

Sending commands or instructing your security system is done through a series of key presses on the panel,

touchpads, or a remote telephone.

Note:

The default master code is 1-2-3-4 when the security system is shipped from the factory. You should change your code

after your system is installed. See

Code options

on page 26.

Table 2.

System communication devices

Device

Description

Control panel

You can enter commands for your security system through simple key presses on the panel.

Depending on how your system is programmed, you may need to enter an access code for

certain commands. An access code is a numeric code that allows authorization to operate

your security system.

Remote handheld touchpad

This touchpad gives you the option to enter commands from any room in your house. You

can enter commands through simple key presses on the touchpad.

Keyfob

Keyfobs are handy for simple arming, disarming and light control functions. They are

portable and can be carried off-site in a purse or pocket.

Telephone

Touchtone telephones can be used to communicate with your system while you are off-site.

Ask your installer if you have this feature.