GE AV447FBS Installation Instructions - Page 8

Grease Filter only (JV338)

1

Charcoal Filter only

1

(JN327 and RN328)

Grease Filter and Charcoal Filter

2

(JV24X, JV347, JV348, JV367

and AV447)

Mounting Screws

4

(8 - 18

x 3/4

Phillips pan

head)

Exhaust Adaptor

1

(for 3

1

4

x 10

rect. venting)

Exhaust Adaptor Screw

1

(8 - 18

x 3/8

Phillips pan

head or hex head)

8

return the unit to the

store in which it was bought for repair or replacement.

repair or

replacement is the responsibility of the customer.

(if other than

the customer), repair or replacement must be made by

arrangement between customer and installer.

Hood width may be greater than the width of the range

or cooktop, but it may not be smaller.

Ensure the range or cooktop is installed per

manufacturer’s installation instructions.

If you are going to vent your range hood to the outside,

see the “Ducting Requirements” section for exhaust duct

preparation.

66

or more

from the

floor to the

top of the

hood

24

, 30

or 36

to

match cooktop

width

30

min.

Bottom edge of

cabinet needs

to be 30

or

more from

the cooking

surface

Flat-blade and Phillips

screwdrivers

Pencil

Metal snips

(in some

applications)

Electric drill

Saw (saber or

keyhole)

Duct tape

Pliers

Level

Caulking

Tape measure

1/4

pivoting

hex socket

Flashlight

Wire stripper

1/4

Nutdriver

Installation Instructions

GE AV447FBS Installation Instructions - Page 8

JV24X, JV347, JV348, JV367

Page 8 highlights