GE CGP650SETSS Installation Instructions - Page 5
Installation Instructions, INSTALLING THE COOKTOP UNIT
View all GE CGP650SETSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Instructions INSTALLING THE COOKTOP UNIT 1 LOCATE ELECTRICAL OUTLET AND GAS SHUT-OFF VALVE BENEATH CABINET NEVER REUSE OLD CONNECTORS WHEN INSTALLING THIS UNIT. Shut Off Valve Electrical Outlet 12″ Below Countertop Install a manual shut-off valve in the gas line in an easily accessible location outside the cooktop. Be sure you know how and where to shut off the gas supply to the cooktop. Install the electrical outlet 12″ below the countertop. 2 PROTECT SURFACE OF COOKTOP Place a towel or tablecloth onto the countertop. Lay the cooktop upside down onto the protected surface. Bottom of cooktop 4 ATTACH BRACKETS TO COOKTOP Remove the screw from the side of the cooktop and screw the hold-down bracket to the side of the cooktop unit. Repeat for opposite side of cooktop. Bottom of Cooktop Pre-drilled hole Cooktop Surface 5 INSERT COOKTOP INTO CUTOUT Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met. Cooktop Cloth under Cooktop 3 LOCATE MOUNTING PARTS Remove the hold down brackets from the literature package. Once the unit is in place, screw the hold- down bracket into the cabinet sides to secure the unit into place. 5