GE CSB42WSKSS Use and Care Manual - Page 4
About the controls with temperature settings.
View all GE CSB42WSKSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
About the controls with temperature settings. Dispense Models Non-dispense Models NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now. The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings. The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment. Changing the Temperature for Non-dispense Models To change the temperature, press and release the (+) or (-) pad to the desired temperature set point for fresh food and freezer separately. Allow 24 hours for the refrigerator to reach the temperature you have set. To turn OFF cooling system, press and hold either (+) pad until both displays show OFF. Changing the Temperature for Dispense Models To change the temperature, press and release the Freezer or Fridge pad. The display will show the set temperature. To change the temperature, press either the Freezer or Fridge pad until the desired temperature is displayed. To turn OFF cooling system, press and hold Fridge and Ice Maker simultaneously for 3 seconds. When the cooling system is OFF the display should read OFF. 4