GE DPGT650EHWW Owners Manual - Page 10

Operating Instructions Safety Instructions About cycle options. NOTE: Not all features are available on all dryer models. Lock You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle. Children cannot accidentally start the dryer by touching pads with this option selected. To lock the dryer, press and hold the DRY LEVEL and TEMP buttons at the same time for 3 seconds. To unlock the dryer, press and hold the DRY LEVEL and TEMP buttons for 3 seconds. When the lock function is enabled, CL will blink in the display with the estimated time remaining. Estimated Time Remaining Displays the approximate time remaining until the end of the cycle. As the cycle begins, you will see an initial approximate total cycle time in the display. Then lights will "race" in the display. This means the dryer is continuously monitoring the amount of moisture in the load. The lights will continue until the dryer senses a low level of moisture in the load. At that point, the dryer will calculate and display the approximate time remaining. My Cycles To save a favorite cycle, set the desired settings and hold down the MY CYCLES button for 3 seconds. A beep will sound to indicate the cycle has been saved. To use your custom cycle, press the MY CYCLES button before drying a load. To change the saved cycle, set the desired settings and hold down the MY CYCLES button for 3 seconds. See page 8 for more details. Installation Instructions Consumer Support Troubleshooting Tips 10