GE DPGT650EHWW Owners Manual - Page 33

Safety Instructions Operating Instructions Before you call for service... Troubleshooting Tips Save time and money! Review the chart below first and you may not need to call for service. GEAppliances.com Problem Dryer won't operate Possible Cause Control panel is asleep Dryer is unplugged Controls are not set properly Fuse is blown/circuit breaker is tripped Electronics need to be reset START was not pressed after a cycle was set Door was opened during the dry cycle Dryer is too cold What To Do • This is normal. Press POWER. • Make sure cord is plugged securely into a working outlet. • Make sure the cycle was set correctly, close the lid and press START. • Check house circuit breakers/fuses. Replace fuses or reset breaker. NOTE: Electric dryers use two fuses or breakers. • Unplug dryer, wait 2 minutes, plug back in and press POWER. • Press START. • Close the door and reset cycle, to the beginning if necessary. Press START. • If the dryer has been exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing POWER. Otherwise, the display will not come on. Normal Operating Sounds The following are normal sounds you may hear: Sound Description Thumping noise when drum rotates • If the dryer has not been used for an extended period of time, you may hear a thumping noise from temporary flat spots on the drum support rollers. The noise will go away after use. Installation Instructions Troubleshooting Tips Consumer Support 33