GE GCG1500RBB Installation Instructions - Page 4

ADVANCE PLANNING CLEARANCES • You should be able to fully open the compactor drawer. Six inches (15.2 cm) is required on the right side of the compactor for bag removal. • Allow 23 inches (58.4 cm) in front of the compactor to remove the drawer. • This compactor is designed as a built-in appliance only. It may be located in any convenient space under a countertop. DO NOT OPERATE FREE-STANDING. • The compactor may be installed beneath countertops of stone or other materials that will not accept screws. No trim kit is required. The compactor must be securely installed in a cabinet that is firmly attached to the house structure. Weight on the compactor drawer could cause the compactor to tip and result in injury. Never allow anyone to climb, sit or hang on the compactor drawer. MODELS WITH A CUSTOM DRAWER PANEL Models ZCGP150 II and GCG1700 II The custom drawer panel and custom handle of your choice should be secured to the compactor before installation begins. A template with instructions and installation hardware is provided with those models. For planning purposes, you may order the template in advance by calling 1.800.GE.CARES (1.800.423.2737) or by visiting our website at GEAppliances.com in the United States. In Canada, call 1.800.561.3344 or visit www.GEAppliances.ca. Order Pub. No. 31-30597. Complete panel installation instructions are included on the template. CUSTOM PANEL SIZE REQUIREMENTS: Maximum panel weight is 12 LBS (5.4 kg). 3/4" (1.9 cm) Thick Custom Panel 29-5/16" (74.5 cm) 14-7/8" (37.8 cm) 4