GE GFDR485EFRR Installation Instructions - Page 33
Re-locate Hinge Assembly And, Handle Spacer, Handle Spacer Cont.
View all GE GFDR485EFRR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installation Instructions 5 RE-LOCATE HINGE ASSEMBLY AND HANDLE SPACER A. Place the inner door frame on a soft and flat surface so that the inner door gasket is facing updwards. B. Remove 6 screws (#8 x 1/2") that secure the hinge assembly and handle spacer. 5 RE-LOCATE HINGE ASSEMBLY AND HANDLE SPACER (CONT.) D. Rotate hinge assembly 180 degrees and re-locate on the opposite side of the inner door frame. E. Rotate the handle spacer 180 degrees and re-locate on the opposite side of the inner door frame. C. Separate the hinge assembly and handle spacer from the inner door frame. Handle spacer Hinge assembly F. Re-install screws securing hinge assembly and handle spacer. Hinge assembly Handle spacer 33
33
Installation Instructions
RE-LOCATE HINGE ASSEMBLY AND
HANDLE SPACER
5
A.
Place the inner door frame on a soft and flat
surface so that the inner door gasket is facing
updwards.
B.
Remove 6 screws (#8 x 1/2”) that secure the
hinge assembly and handle spacer.
D.
Rotate hinge assembly 180 degrees and
re-locate on the opposite side of the inner door
frame.
E.
Rotate the handle spacer 180 degrees and
re-locate on the opposite side of the inner door
frame.
RE-LOCATE HINGE ASSEMBLY AND
HANDLE SPACER (CONT.)
5
F.
Re-install screws securing hinge assembly and
handle spacer.
C.
Separate the hinge assembly and handle spacer
from the inner door frame.
Hinge
assembly
Handle
spacer
Hinge
assembly
Handle
spacer