GE GFSS6KKYSS Installation Instructions - Page 18
Remove The Refrigerator Doors, Cont.
UPC - 084691190929
View all GE GFSS6KKYSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Instructions INSTALLING THE REFRIGERATOR (cont.) 5 REMOVE THE REFRIGERATOR DOORS (cont.) H Lift the door straight up to remove. 6 REPLACING THE REFRIGERATOR DOORS (cont.) D Insert the top hinge pin into the hinge hole on top of the refrigerator door. Make sure the door is aligned with the cabinet and opposite door. Attach the hinge to the top of the cabinet. Do not tighten bolts completely. I Remove the two bolts using a 3/16″ Allen wrench and two Phillips-head screws from the center hinge. Set the hinge, bolts and screw aside. E On left-hand doors, pass the wires and water line through the top hinge pin. Then connect the water line and two connectors. 6 REPLACING THE REFRIGERATOR DOORS A Install the center hinge on each side. B Lower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door. C Securely tape the door shut with masking tape or have a second person support the door. F Attach the ground wire with a Phillips-head screwdriver at the right and left hinge. G Make sure the gasket on the door is flush against the cabinet and is not folded. Make sure the door is straight and the gap between the doors is even across the front. While holding the aligned door in place, tighten the top hinge bolts. H Reconnect the two connectors at each side of the top cap and reattach the three Phillips-head screws on top. I Reinstall the rectangular caps removed in Step 5. 18