GE GFSS6KKYSS Installation Instructions - Page 23

Level The Freezer Door, Set The Controls, Remove Packaging

Get GE GFSS6KKYSS - 26' Refrigerator PDF manuals and user guides
UPC - 084691190929
View all GE GFSS6KKYSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Installation Instructions 14 LEVEL THE FREEZER DOOR 14 LEVEL THE FREEZER DOOR (cont.) C Find the best position to align the door slope. A Locate the height adjuster in the freezer door. Slightly loosen the four Phillips-head screws from the door on each side (right and left). Slope Example: The slope is about 2 mm as shown below. B Loosen the controller screw with a Phillips-head screwdriver to adjust the level. Reference Plane Rotate the height adjuster to +2.0 to reduce the door slope. D After adjustment, tighten all the screws. 15 SET THE CONTROLS Set the controls to the recommended setting. 16 REMOVE PACKAGING A) Remove all tape, foam and protective packing from shelves and drawers. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Installation Instructions
LEVEL THE FREEZER DOOR
Locate the height adjuster in the freezer door.
Slightly loosen the four Phillips-head screws
from the door on each side (right and left).
Loosen the controller screw with a Phillips-head
screwdriver to adjust the level.
14
A
B
SET THE CONTROLS
Set the controls to the recommended setting.
15
REMOVE PACKAGING
A)
Remove all tape, foam and protective
packing from shelves and drawers.
16
23
LEVEL THE FREEZER DOOR
(cont.)
Find the best position to align the door slope.
After adjustment, tighten all the screws.
14
C
D
Example: The slope is about
2 mm as shown below.
Rotate the height adjuster to +2.0
to reduce the door slope.
Reference
Plane
Slope