GE GLDT696JSS Installation Instructions - Page 7

Installation Instructions STEP 6 - POSITION WATER LINE AND HOUSE WIRING • Position water supply line and house wiring on the floor of the opening to avoid interference with base of dishwasher and components under dishwasher. STEP 8 - SLIDE DISHWASHER PARTIALLY INTO CABINET IMPORTANT - Do not push against front panel with knees. Damage will occur. • Slide dishwasher into the opening a few inches at a time. 4" 6" Water House Line Wiring STEP 7 - INSERT DRAIN HOSE THROUGH CABINET • Upright the dishwasher and position in front of the opening. Insert drain hose into cabinet wall hole. If a power cord is used, guide the end through a separate hole. Maximum Drain Hose Length 10' Insulation Blanket Water Line Drain Hose House Wiring Power Cord (If Used) TIP: Position water line and house wiring on the floor to avoid interference with base of dishwasher. Do not push against front door panel with knee. Damage to the door panel will occur. • As you proceed, pull the drain hose through the opening under the sink. Stop pushing when the dishwasher is a few inches forward of adjacent cabinetry. • Make sure drain hose is not kinked under the dishwasher and there is no interference with the water line and wiring or any other component. 7