GE GLDT696JSS Installation Instructions - Page 9

Installation Instructions STEP 11 - SECURE DISHWASHER TO CABINET The dishwasher must be secured to the countertop. • Position the dishwasher so that the tub flange aligns with the front face of the cabinet frame. IMPORTANT - Check to be sure the dishwasher is centered in the opening and there is no interference with adjacent cabinets when opening or closing the door. STEP 12 - CONNECT WATER SUPPLY Connect water supply line to 90° elbow. • Slide compression nut, then ferrule over end of water line. • Insert water line Into 90° elbow. • Slide ferrule against elbow and secure with compression nut . CompressiNountNut FerFruelrerule Align tub flange to front face of cabinet frame • Fasten the dishwasher to the underside of the countertop with the 2 Phillips screws provided. IMPORTANT - Drive screws straight and flush. Protruding screw heads will scratch the top of the control panel and can interfere with door closing. Hot water 9900°EElblbooww supply line IMPORTANT - Check to be sure that door spring does not rub or contact the fill hose or water supply line. Test by opening and closing the door. Re-route the lines if a rubbing noise or interference occurs. 9