GE GSC22QGT Use and Care Manual - Page 11

Press tab and pull shelf forward to remove 1 2 Slide-Out Spillproof Shelf The slide-out spillproof shelf allows you to reach items stored behind others. The special edges are designed to help prevent spills from dripping to lower shelves. To remove: Slide the shelf out until it reaches the stop, then press down on the tab and slide the shelf straight out. To replace or relocate: Line the shelf up with the supports and slide it into place. The shelf can be repositioned when the door is at 90° or more. To reposition the shelf, slide the shelf past the stops and angle downward. Slide shelf down to the desired position, line up with the supports and slide into place. Make sure you push the shelves all the way back in before you close the door. QuickSpace™ Shelf This shelf splits in half and slides under itself for storage of tall items on the shelf below. This shelf can be removed and replaced or relocated just like Slide-Out Spillproof Shelves. On some models, this shelf can not be used in the lowest position. Removable Beverage Rack The beverage rack is designed to hold a bottle on its side. It can be attached to any slide-out shelf. To install: Line up the large part of the slots on the top of the rack with the tabs under the shelf. Then slide the rack back to lock it in place. Door Wine/Beverage Rack (on some models) This rack holds up to 5 cans, one bottle of wine or one 2-liter bottle of soda. The rack hangs from the sides of the dairy bin. To remove: Empty the wine/beverage rack. To replace: Reattach the rack to the sides of the bin. Engage the back side of the bin in the molded supports on the door. Then push down on the front of the bin. The bin will lock into place. Holding the bottom of the dairy bin, lift the front straight up, then lift up and out. To detach the rack from the dairy bin, pull the rack's side wires out of the holes on each side of the dairy bin. 11