GE GSC22QGT Use and Care Manual - Page 37
Turn the Water On, Plug In the Refrigerator, Start the Icemaker
View all GE GSC22QGT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Turn the Water On Turn the water On at the shutoff valve. Tighten any connection that leaks. Replace the access cover and tighten all screws (on some models). Plug In the Refrigerator Plug in the refrigerator to the Power Outlet and turn On. IMPORTANT: Always operate the Refrigerator from a power source of the same Voltage, Frequency and Rating as indicated on the Refrigerator Identification Plate. Operate the Refrigerator from an Earthed (Grounded) 3 Pin Power Outlet fully accessible when the refrigerator is located in its normal operating position. Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall, making sure the power cord and the water line tubing are not trapped, entangled or squashed by the refrigerator (including the wheels) or wall. Start the Icemaker Set the icemaker power switch to the I position. The icemaker will not begin to operate until it reaches its operating temperature of -9°C or below. It will then begin operation automatically if the icemaker power switch is in the I position. NOTE: In lower water pressure conditions, the water valve may turn on up to 3 times to make sure enough water reaches the icemaker. Power switch 37