GE GSC22QGT Use and Care Manual - Page 20

Trim kits and decorator panels. For Built-In Style models Read these instructions completely and carefully. Before You Begin Some models are equipped with trim kits that allow you to install door panels. Panels less than 6 mm thick When installing wood panels less than 6 mm thick, you need to create a filler panel, such as 3 mm cardboard, that will fit between the face of the door and the wood panel. If you are installing the pre-cut decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decorator or wood panel and the filler panel should be 6 mm. Panels 6 mm thick or less 6 mm max 19 mm or Raised Panel A raised panel design screwed or glued to a 6 mm thick backing, or a 19 mm routed board can be used. The raised portion of the panel must be fabricated to permit clearances of at least 5.1 cm from the handle side for fingertip clearance. Panels thicker than 6mm, up to 19 mm max, will require that the outer 8 mm of panel perimeter be no thicker than 6 mm. Weight limitations for custom panels: Refrigerator Door 17 kg max. Freezer Door 13 kg max. Panels thicker than 6 mm 8 mm 6 mm max 19 mm 5.1 cm Clearance Handle Side Appearance Panel 6 mm Thick Backing 19 mm Refrigerator Door 20