GE GTWN3000MWS Use and Care Manual - Page 6

Safety Instructions Operating Instructions About washer features. The Agitator Cap (on some models) The agitator cap fits into the top of the agitator. If it accidentally comes off, simply put it back on. Fabric Softener Dispenser (on some models) The fabric softener dispenser automatically releases liquid fabric softener. Setting the knob ensures that it dispenses at the proper time. 3 Add water to dispenser until it reaches the maximum fill line. SETTINGS Do not stop the washer or raise the lid during the first spin. This will cause the dispenser to empty too soon. To use, follow these steps: OFF Set when adding FABRIC SOFTENER 1 Make sure dispenser is securely attached to agitator. Do not pour anything into the and/or CLEAN RINSE agitator if the agitator cap or 2 Use only diluted liquid fabric softener. dispenser is removed. Pour into dispenser, using amount recommended on package. 4 Select FABRIC SOFTENER setting knob to Never pour fabric softener directly on items. activate the cycle. It may stain them. Note: Fabric softener will not dispense if the knob is in the "OFF" position. Separate for cleaning Cleaning the Fabric Softener Dispenser (on some models) 1 Remove the dispenser from the top of the agitator. 2 Separate the dispenser cup from the cover by grasping the top and pushing down on the inside of the cup with your fingers. Dispenser cup will pop free from the cover. 3 To clean the dispenser, soak both the dispenser cup and the dispenser cover in the following solution: n 1 uS gallon (3.8 liters) warm water n 1/4 cup (60 ml) heavy-duty liquid detergent n 1 cup (240 ml) bleach 4 If necessary, loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush; you may roughen the surface of the dispenser. 5 Rinse and reassemble dispenser. Place dispenser back on the agitator. Troubleshooting Tips Consumer Support 6