GE JAP02SNSS Use and Care Manual - Page 17
Operating Instructions - 24
UPC - 084691169116
View all GE JAP02SNSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Special features of your oven control. Tones at the End of a Timed Cycle At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continuous 6 second beep may be canceled. To cancel the 6 second beep: Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Touch the BROIL HI/LO pad. The display shows CON BEEP (continuous beep). Touch the BROIL HI/LO pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.) Touch the START pad. 12 Hour, 24 Hour or Clock Black-Out Your control is set to use a 12 hour clock. If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below. Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Touch the TIMER/CLOCK pad once. The display will show 12 hr. If this is the choice you want touch the START pad. Touch the TIMER/CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want touch the START pad. Touch the TIMER/CLOCK pad again to black-out the clock display. The display will show OFF. If this is the choice you want touch the START pad. NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function. 17