GE JAP02SNSS Use and Care Manual - Page 23
How to Delay the Start of Cleaning, After a Clean Cycle
UPC - 084691169116
View all GE JAP02SNSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Using the self-cleaning oven. The oven door must be closed and all controls must be set correctly for the cycle to work properly. How to Delay the Start of Cleaning Touch the SELF CLEAN pad. Using the + or - pad, enter the desired clean time. Touch the DELAY START pad. Using the + or - pad, enter the time of day you want the clean cycle to start. Touch the START pad. The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. When the LOCKED DOOR light is off, open the door. After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap-filled scrubbing pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle. s You cannot set the oven for cooking until the oven is cool enough for the door to unlock. s If the shelves become hard to slide, wipe the shelf supports with cooking oil. 23