GE JGB3001ERSS Owners Manual - Page 48
Troubleshooting Tips
View all GE JGB3001ERSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Before you call for service... Troubleshooting Tips Problem Display goes blank (on some models) Possible Causes A fuse in your home may be blown or the circuit breaker tripped. The clock is turned off so that it does not show in the display. What To Do • Replace the fuse or reset the circuit breaker. • See the Using the clock and timer section. Display flashes (on some models) Power failure. • Reset the clock. Unable to get the Oven control pads were • The Bake and Broil Hi/Lo pads must be touched at display to show "SF" not touched properly. the same time and held for 3 seconds. (on some models) Power outage, Power outage or surge. • Reset the clock. If the oven was in use, you must reset clock flashes it by touching the Clear/Off pad, setting the clock and (on some models) resetting any cooking function. "Burning" or "oily" odor This is normal in a new oven • To speed the process, set a self-clean cycle for a emitting from the vent and will disappear in time. minimum of 3 hours. See the Using the self-cleaning oven section. Strong odor An odor from the insulation around the inside of the oven is normal for the first few times the oven is used. • This is temporary. Fan noise A cooling fan may automatically • This is normal. The cooling fan will turn off and on. turn on and off to cool internal parts. Drawer does not slide The drawer is out of alignment. • Fully extend the drawer and push it all the way in. smoothly or drags See the Care and cleaning of the range section. Drawer is overloaded or load is unbalanced. • Reduce weight. Redistribute drawer contents. 48