GE JP256BMBB Use and Care Manual - Page 12

Installation 30″ Electric Cooktop Instructions JP256 "If you have questions, call 800.GE.CARES or visit our website at: ge.com" BEFORE YOU BEGIN Read these instructions completely and carefully. • IMPORTANT - Save these instructions for local inspector's use. • IMPORTANT - Observe all governing codes and ordinances. • Note to Installer - Be sure to leave these instructions with the Consumer. • Note to Consumer - Keep these instructions for future reference. • Product failure due to improper installation is not covered under the Warranty. WARNING - This appliance must be properly grounded. • ATTENTION INSTALLER - ALL COOKTOPS MUST BE HARD WIRED (DIRECT WIRED) INTO AN APPROVED JUNCTION BOX. A "PLUG AND RECEPTACLE" IS NOT PERMITTED ON THESE PRODUCTS. • Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty. MATERIALS YOU WILL NEED Junction Box Wire Nuts TOOLS YOU WILL NEED Pencil Phillips-Head Screwdriver Saber Saw 1/4″ Nut Driver 1/8″ Drill Bit & Electric or Hand Drill Ruler or Straightedge PARTS INCLUDED Safety Glasses Foam Tape 2 Hold-Down Brackets 6 Hex-Head Screws (4 required, 2 extra) 2 Thumbscrews 12