GE JP256BMBB Use and Care Manual - Page 17
Installing The Cooktop, Important
UPC - 084691164944
View all GE JP256BMBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Instructions INSTALLING THE COOKTOP 1 INSTALLING THE JUNCTION BOX Install an approved junction box where it will be easily reached through the front of the cabinet where the cooktop will be located. The cooktop conduit is 58″ long. Install junction box so that it can be reached through the front of the *5″ Min. cabinet . *7″ Max. when installing over GSM2100 Dishwasher 3 ATTACH FOAM TAPE Apply the foam tape around the outer edge of the glass. Do not overlap the foam tape. Bottom of Cooktop Foam Tape Cooktop Glass 4 LOCATE MOUNTING PARTS Start one screw through the bracket and into the cooktop (both sides). Do not tighten. Turn the bracket inward to avoid interference when dropping the cooktop into the countertop. IMPORTANT: The junction box must be located where it will allow considerable slack in the conduit for serviceability. INSTALLATION OVER GSM2100 DISHWASHER The center of the junction box should be 5″ to 7″ below the cooktop lip, so it does not interfere with the dishwasher, installation or operation. Electrical connections must be made before placing the cooktop into the cutout. 2 PROTECT SURFACE OF COOKTOP Place a towel or tablecloth onto the countertop. Lay the cooktop upside down onto the protected surface. Bottom of Cooktop Cloth under Cooktop 17