GE JP3036SLSS Installation Instructions - Page 6

Installation Instructions INSTALLING THE COOKTOP 1 VERTICAL CLEARANCE Install an approved junction box where it will be easily reached through the front of the cabinet where the cooktop will be located. The cooktop conduit is 4 feet long. 3 ATTACH FOAM TAPE Apply the foam tape around the outer edge of the glass. Do not overlap the foam tape. Bottom of Cooktop Foam Tape 16" Min. Install junction box so that it can be reached through the front of the cabinet. Cooktop Glass NOTE: On ZEU30 and ZEU36 models, apply the foam tape around the outer edge of the glass on the sides and rear of the unit only. IMPORTANT: The junction box must be located where it will allow considerable slack in the conduit for serviceability. 2 PROTECT SURFACE OF COOKTOP Place a towel or tablecloth onto the countertop. Lay the cooktop upside down onto the protected surface. Bottom of Cooktop 4 MOUNTING PARTS Remove the hold down brackets and screws from the literature package. Mounting Screw Screw the hold down bracket to the side of the cooktop unit. Repeat for opposite side of cooktop. Bottom of Cooktop Pre-Drilled Hole Foam Tape Cloth under Cooktop Cooktop Glass Hold Down Bracket 6 31-11072-1