GE JP3036SLSS Installation Instructions - Page 7
Installation Instructions, INSTALLING THE COOKTOP Cont
![]() |
View all GE JP3036SLSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation Instructions INSTALLING THE COOKTOP (Cont) 4 MOUNTING PARTS (Cont) Alternate Installation: You can order an alternate installation kit WB01X24570 with wing nuts and brackets by calling 800.GE.CARES. See diagram for instructions. Open the cabinet door. Install the second screw through the bracket and tighten. Then tighten the first screw. Install thumbscrew until it touches the bottom of the countertop. 6 ELECTRICAL CONNECTIONS A When making the wire connections, use the entire length of conduit provided. The conduit must not be shortened. B With the cooktop in place, open the front of the cabinet door. C Insert the wires from the conduit through the opening of the junction box. Cooktop Countertop IMPORTANT: Turn the thumbscrew until it touches the bottom of the countertop. Do not overtighten. 5 INSERT COOKTOP INTO CUTOUT Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met. Cooktop Hold Down Bracket Red Ground Strain Relief Clamp Black D Connect the red and black leads from the cooktop conduit to the corresponding leads in the junction box. Connect the ground wire. Red Ground wire location Black E Once the connections are made, secure wires together using wire nuts. Red Ground Strain Relief Clamp Black Attach Hold Down Brackets to cabinet. 31-11072-1 7
![](/manual_guide/products/general-electric-jp3036slss-installation-instructions-75a1525/7.png)