GE JT965SKSS Owners Manual - Page 45

Receptacle Socket Bulb Tab Glass cover Oven shelf ge.com Lower Oven Light Bulb NOTE: The glass cover (on some models) should be removed only when cold. Wearing latex gloves may offer a better grip. CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the oven at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely. For your safety, do not touch a hot bulb with bare hands or a damp cloth. To remove: Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket. Using gloves or a dry cloth, remove the bulb by pulling it straight out. To replace: Use a new 130-volt halogen bulb, not to exceed 50 watts. Using gloves or a dry cloth, remove the bulb from its packaging. Do not touch the bulb with bare fingers. Receptacle Use gloves or cloth Push the bulb straight into the receptacle all the way. Place the tabs of the glass cover into the grooves of the socket. Turn the glass cover clockwise 1/4 turn. For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool. Reconnect electrical power to the oven. Oven Shelves (lower oven) Clean the oven shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water and dry with a clean cloth. NOTE: The shiny, silver-colored oven shelves (on some models) may be cleaned in the selfcleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle. To make the shelves slide more easily, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel. Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number: National Parts Center 1.800.626.2002 ge.com 45 Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support