GE JVM2052DNWW Installation Instructions - Page 20

Installation Instructions C3 ADAPT MICROWAVE OVEN BLOWER FOR RECIRCULATION 1 Remove and save 3 blower plate screws and 2 blower unit mounting screws. Blower unit Blower plate mounting screw (3 screws) Blower plate Back plate Blower unit mounting screw (2 screws) 2 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. AFTER: Fan Blade Openings Facing Forward NOTE: Make sure wires remain routed in the grooves of the motor frame. 4 Place the blower unit back into the opening. WARNING: Risk of electric shock can cause injury or death. Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched. 3 Roll the blower unit 90° so that fan blade openings are facing toward the front of the microwave oven. BEFORE: Fan Blade Openings Facing Up Roll 5 Reattach the blower plate to the microwave oven. Attach with the 3 blower plate mounting screws and then the 2 blower unit mounting screws. Blower plate mounting screw (3 screws) Blower unit Blower plate Back plate Blower unit mounting screw (2 screws) 20