GE JVM2052DNWW Installation Instructions - Page 22
Install the Charcoal Filter, a Phillips screwdriver.
![]() |
UPC - 084691188070
View all GE JVM2052DNWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation Instructions C5 INSTALLING THE CHARCOAL FILTER 1 Remove 2 screws on the top front of the grille using a Phillips screwdriver. 2 Open the door. 3 Remove the grille, pulling it straight off. Charcoal Filter 4 Install the charcoal filter. When properly installed, the wire mesh of the filter should be visible from the front. 5 Replace the grille and the screws. 6 Close the door. Insert mesh-side up 22
![](/manual_guide/products/general-electric-jvm2052snss-installation-instructions-20cfcd6/22.png)
22
Installation Instructions
6
3
4
2
1
INSTALLING THE CHARCOAL
FILTER
C5
Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.
Replace the grille and the screws.
Close the door.
Charcoal
Filter
Insert mesh-side up
Remove 2 screws on the top front of the grille using
a Phillips screwdriver.
Open the door.
Remove the grille, pulling it straight off.
5