GE JVM3160RFSS Installation Instructions - Page 10

Installation Instructions C DETERMINING MOUNTING PLATE LOCATION UNDER YOUR CABINET Plate Position - flat bottom cabinet Plate Position - recessed cabinet bottom Mounting Plate Tabs Touching the Cabinet Bottom Mounting Plate Tabs Touching the Back Frame of the Cabinet At least 30s, up to 36s 3ODWH3RVLWLRQ²FDELQHWZLWKIURQWRYHUKDQJ Mounting Plate with Tabs Below Cabinet Bottom the Same Distance as the Front Overhang Depth 30s to Cooktop Your cabinets may have decorative trim that interferes with the microwave oven installation. You may need to remove the decorative trim to install the microwave oven properly and to make it level. THE MICROWAVE OVEN MUST BE LEVEL. Use a level to make sure the cabinet bottom is level. If the cabinets have a front overhang, install the mounting plate down the same distance as the front overhang depth. This will keep the microwave oven level. 1 Measure the inside depth of the front overhang. 2 Draw a horizontal line on the back wall an equal distance below the cabinet bottom as the inside depth of the front overhang. 3 For this type of installation with front overhang, align the mounting tabs with this horizontal line, not touching the cabinet bottom as described in Step D. 30s to Cooktop 10